WHEELS AND TIRES

This small part can save you a big headache down the road! Prevents swingarm damage caused by the small outside diameter factory spacer. Direct re...

HUGH'S HAND BUILT SPROCKET LOCK KIT No more loose bolts on that XL, Big Twin or Tube Frame Buell motorcycle – not with our Hugh’s HandBuilt HD Spr...

Stock axle adjuster plates are stamped out of a soft, weak cast material. They are prone to crack or mushroom in under even minor torque. Bung King...

    WHEEL SPACER SHIM KIT FOR TIMKEN/TAPERED BEARINGS Used to set the end play on Timken/Tapered Wheel Bearings (Pre-2000 model bikes) OEM-style r...

WHEEL BEARING "TOP HAT" WASHER FOR TIMKEN/TAPERED BEARINGS Spacer goes between the Timken bearing and shims to prevent to large outer diameter shi...

Our friend Paul over at Bare Knuckle Chopper Parts makes another GREAT solution to the terrible stock axle adjusters. First, they use their tried a...

FXR AXLE ADJUSTERS Great cost effective solution. The stock adjuster plates are a thin soft material backing plate is also prone to failure. When t...

Chrome FXR Rear Axle Kit Chrome Plated Includes Axle, Nut, Washer and Wheel Spacer Replaces Harley OEM # 41110-79A 12-5/8" From Inside Of Bolt Hea...

WHEEL BEARING SEAL FOR TIMKEN/TAPERED BEARINGS Made in the USA Fits '84-'99 Models front or rear Sold each! (2 require per each wheel)

Chrome Front Axle Kit Chrome Plated Includes Axle, Nut, and Washer Replaces Harley OEM # 43895-87 Fits 87' - 99' FXR, 87' - 99' XL &  91' - 99...

TIMKEN WHEEL BEARING AND RACE Genuine Timken® direct replacements of OEM components Fits front or rear applications Made in the U.S.A. Replaces OE...

High quality replacement for the OEM speedo drive unit End installer is responsible for verifying fitment and ratio needed! Click here for replac...

Alloy Art Super Cush Drive Dampener Injection-molded with super high-quality poly-urethane material High-quality replacement dampener made to be u...

BARE KNUCKLE PAUL FXR STAINLESS STEEL REAR AXLE KIT FXR Stainless Steel Axle Kit- the finest FXR axle Kit to hit the street. Our kit consists o...

Stock FXR axle adjusters are small eyelets welded to a stud. Due to the small surface area, your swing arm can dent or "mushroom" in. After the swi...

51 TOOTH REAR DRIVE SPROCKET High-grade carbon steel  Proper size at .375" thick for 530 chains Gloss Black Finish Available in flat or dished off...

Allows the use of '00+ style rotors on '99 & earlier wheels Reduces the ID of the rotor from ~2.2" to ~1.9" Has provision for speedo drive uni...

BARE KNUCKLE PAUL 91'-05' DYNA STAINLESS STEEL REAR AXLE KIT The 1991-2005 Dyna Stainless Steel Axle Kit! The finest Dyna axle Kit to hit the s...

BARE KNUCKLE PAUL 06'-07' AND 08' LATER DYNA STAINLESS STEEL REAR AXLE The 2006/2007 and 2008/Later Dyna Stainless Steel Rear Axle! This is the sa...

49 TOOTH REAR DRIVE SPROCKET High-grade carbon steel  Proper size at .375" thick for 530 chains Gloss Black Finish Available in flat or dished off...

RAMJET RACING SLANT 5 RACE WHEEL Our Slant 5 wheel is proudly made in Arizona, USA! Since these wheels are made per model/application and include w...

VECTOR ONE AXLE ADJUSTER Keep your belt or chain tensioned and your wheel aligned with our Vector One Billet Bagger Axle Adjuster. The functional p...

48 TOOTH REAR DRIVE SPROCKET High-grade carbon steel  Proper size at .375" thick for 530 chains Gloss Black Finish Available in flat or dished off...

49 TOOTH REAR DRIVE SPROCKET High-grade carbon steel  Proper size at .375" thick for 530 chains Available in Chrome or Black Finish Available in f...

OEM-style replacement spacers for most models Spacers are available with or without flanges spacers sold each Made in the U.S.A. Click here for re...

51 TOOTH REAR DRIVE SPROCKET High-grade carbon steel  Proper size at .375" thick for 530 chains Available in Chrome or Black Finish Available in f...

46 TOOTH REAR DRIVE SPROCKET High-grade carbon steel  Proper size at .375" thick for 530 chains Available in Chrome or Black Finish Available in f...

BARE KNUCKLE PAUL 06/07 and 2008/LATER DYNA MIDGLIDE FRONT AXLE 06/07 and 2008/later Dyna Midglide Front Axle- This is the same unbreakable 17-...

46 TOOTH REAR DRIVE SPROCKET High-grade carbon steel  Proper size at .375" thick for 530 chains Gloss Black Finish Available in flat or dished off...

48 TOOTH REAR DRIVE SPROCKET High-grade carbon steel  Proper size at .375" thick for 530 chains Available in Chrome or Black Finish Available in f...

RAMJET RACING SLANT 5 BRAKE ROTOR Cut out of air craft grade 6061 billet for superior strength and lightness Available in 1 solid piece style or 2...

RAMJET RACING SLANT 5 SPROCKET Available multiple different tooth count options Cut out of air craft grade 6061 billet for superior strength and l...

RAMJET RACING SLANT 5 PULLEY Cut out of air craft grade 6061 billet for superior strength and lightness Available in multiple different finishes: ...

KRAUS DYNAMOTO AXLE AND WHEEL SPACER KITS Front Axle and Spacers kits for KRAUS Ohlins R&T forks Dynamoto Axle and Wheel Spacer kits allow you...

TRASK FL Titanium Front Axle Kit Upgrade your Harley-Davidson FL with our Titanium Axle Kit engineered for lightweight strength and precision handl...

Arlen Ness® proprietary billet aluminum wheel hub design Cartridge hub features both wheel bearings pre-set for optimum radial and lateral run out...

ProCross forged billet wheels feature a lightweight design inspired by the racetrack. The triangulated spokes are engineered for an excellent stren...

RAMJET RACING SLANT 5 RACE WHEEL Add quantity 1 of this item to your cart when purchasing RPC Slant 5 Race Wheels if you need a cush drive hub. If...

Our friend Paul over at Bare Knuckle Chopper Parts makes another GREAT solution to the terrible stock axle adjusters. First, they use their tried a...

RAMJET RACING SLANT 5 AIR CLEANER COVER Another piece to our Slant 5 collection! Add this to complete your set! Or use our Slant 5 Air Cleaner Cove...

Geezer Engineering Fork-Sliders are designed & assembled in the USA. They powder coat Fork-Sliders domestically to ensure the highest possible...

Geezer Engineering Fork-Sliders are designed & assembled in the USA. They powder coat Fork-Sliders domestically to ensure the highest possible...

Clean up your bike’s front end and add extra braking power at the same time. Extremely strong wheels made in our custom drop forge mold and CNC ma...