ELECTRICAL

FXR BATTERY HOLD DOWN Replaces OEM #66183-82 Complete with hardware Eliminate battery movement causing terminal arching against seat pan or ot...

INTELLITRONIX FUEL GAUGES Now you can really watch your fuel level with the Intellitronix super bright LED digital fuel gauge!  It is microprocesso...

NAMZ “Plug-n-Play” Rear Fender Harness, 8-Position Multilock to 6-position Multilock, 100% plug-n-play. Simple to install, 100% plug and play! Can...

Tri Starr has over 29 years experience rebuilding and custom building obsolete Fuel Sending Units for all makes and models of Vehicles, Boats and...

This allows 98' & earlier Harley-Davidson models to mount a 99' & newer tail light! Such as our Night Prowler LED Tail light! Includes a...

FXR BATTERY HOLD DOWN WITH TERRY COMPONENTS CABLES When putting a NOCO NLP20 lithium battery or a 20L battery (OEM #65989-97, factory in 97'-...

DIRCET STARTER BUTTON Used to bypass the handlebar starter switch. Simply flip the run switch and press this button! Good back up to have if your ...

Always trying to give back and make those HARD TO FIND parts available again… only made BETTER than OEM and ALWAYS MADE IN THE U.S.A !!! Here is an...

Delivers up to 5 times more nergy to the spark plug Can withstand temperatures over 500°F Heavy duty silicone outer layer Fully compatible for EFI...

The ultimate tuning device for dyno tuning and recording data! The TTS Bluetooth MasterTune System is designed specifically to tune and log data on...

CHROME COIL COVER Chrome Finish Fits 82' & Up FXR Replaces OEM 31625-82

SPEED-KINGS EVO STATOR PLUG RETAINER Ditch that flimsy stator plug retainer and upgrade to a stronger, tried, and true solution! This stator plug r...

TURN SIGNAL COVER PLATES Covers the hole in the rear fender strut cover when removing the rear turn signals Made of steel and chrome plated Includ...

IGNITION SWITCHES WITH KEYS (MULTIPLE MODELS) Quality OEM style and custom replacement ignitions switches Some options include fork or saddlebags ...

Available in Smooth Chrome or Gloss Black housing with diamond-style clear lens and reflector optics (Can be replaced by a factory or after market...

MOTO GADGET MO. UNIT CABLE KIT The mo.unit cable kit is a ready-made set of various cables to aid in the assembly of a wiring harness. The differen...

MOTO GADGET M. UNIT BLUE The new mo.unit blue is an improved version of the tried and true mo.unit by undergoing significant development and improv...

2X More Power. 10X More Starts. 5X Longer Life. NOCO Lithium NLP14/NLP20/NLP30 12V Lithium Powersport Batteries.  The most highly-designed and engi...

BATTERY TENDER USB CHARGER Plugs directly into SAE style pig tail 2.1A maximum output current Allows for charging a wide range of devices

For use on 98' & earlier models when installing a 99' & newer style tail light with integrated turn signals. This harness is for the turn ...

Used to convert models with factory points ignition (1970'- ~1980') to modern electronic ignitions Perfect fit when upgrading to a Dynatek 2000i ig...

CUSTOM DYNAMICS SMART STABILIZER Used to slow the turn signal flash rate to normal after installing LED Turn Signals. Does not produce heat or put...

Available in 15A, 30A or 50A Solid replacements to freshin up your electrical system Sold each Notes: 15A replaces OEM #74589-73 30A replaces O...

One of the key components to upgrade and "bullet proof" your Evo/Shovel! Ditch that factory, low performing ignition module that is prone to meltin...

Perfect replacement for that old factory speedo! Speedometer features a 2:1 ratio with 120 mph face Speedo cable drive is on the rear of speedomet...

Better low speed output to reduce battery discharge at an idle. Lower operating temperature for longer service life. Improved plugs that will ...

These are simply the best! Want a starter that starts better, lasts longer and wont leave you stranded? Here you go! Nippondenso starters are as...

BAJA DESIGNS LP6 / LP9 ROCK GUARDS This rock guard/light cover fits the LP6 or LP9. It is designed to protect from harsh terrain that may throw dir...

High quality plug & play (for canbus models) meter that is equipped with an 8-color changeable LCD display Features a tachometer/speedometer c...

Replaces stock harness when converting to taller handlebars 48" long wires and 38" long black covering allow the installation of almost any height...

NAMZ Universal Handlebar Switch Wire Extensions, Cut & Solder Applications Premium quality Wire ends are stripped with slugs left on to preven...

Custom Dynamics LED low-profile taillight offers 45 dual-intensity red LEDs with a Red or Smoked lens and optical top license plate illumination w...

LEXIN PRODUCTS ARE TEMPORARILY UNAVAILABLE PLEASE SEE ALL OF OUR OTHER COMMUNICATION OPTIONS HERE: AUDIO AND COMMUNICATIONS The New P5 Advanced Sma...

Features two advance curve families that are adjustable to accommodate stock and modified engines Selectable multi-spark mode for quick starting a...

This tool is used to move the ignition switch from one position to another when the knob is removed. It can also be used to align the internal lug...

The TC88 is a fully PRE-programmed performance ignition with 16 programmable advance curves and 8 Rev limiter settings. All functions feature full ...

Namz ignition system harnesses (Twin cam) 100% made in the USA! Great options for building a early / late model Twin cam FXR, chopper or converting...

BATTERY TENDER LCD BATTERY VOLT METER LCD displays battery voltage when the button is pressed Displays voltage range of 3-16V Resolution of +/- 0....

Designed for use in custom applications where a Twin Cam motor and crank sensor are used. Does not use a MAP or Cam position sensor. Complete igni...

Extended harness simplifies handlebar swaps that require longer wiring Color coded to match OEM wiring; measures 36" in length Made in the U.S.A. ...

This 36" plug-n-play harness allows you to relocate you digital gauge You can also use this harness to install a HD or Koso HUD gauge on any 18'+ ...

Custom Dynamics plug-and-play wiring adapter mates to the OEM center tail light connector on the 2022+ Harley-Davison Low Rider ST (FXLRST) & L...

High quality replacement sensors Also know as CKP sensor

Used when raising bars or relocating speedo/instrument. Some models are plug and play. Other require de pinning the connected but no soldering or ...

IN STOCK!  The LP6 Pro is a 6-inch powerhouse featuring a total of 11,225 total lumens and of 200-degree spread of usable LED light thanks to the d...

100% Plug and play Designed and tested to not cause harm or interference to the motorcycle's computer Color coded for easy install Made in the USA...

This jumper harness is designed to enable the use of Apple CarPlay® and Android auto on 2019-Up* Harley-Davidson® Touring models equipped with GTS ...

CUSTOM DYNAMICS HEADLIGHT BUCKET AND ADAPTER FOR M8 SOFTAILS Allows the use of a traditional 5.75" (5 3/4") headlamp on '18 & newer Softail mo...