New products

Distinctive reproduction gas tanks constructed of drawn steel Use with '84-E '96 screw-in caps (sold separately) Stock dash may need to be shimmed...

Distinctive reproduction gas tanks constructed of drawn steel Use with '84-E '96 screw-in caps (sold separately) Stock dash may need to be shimmed...

Rubber grommet with metal sleeve Sold each to the consumer; sold in 10-pack to dealer Manufacturer Part Number: 22-0112-AHC4

Replacement mounting kit for rubber-mount Quickbob® gas tank Manufacturer Part Number: 345283-HC4

Tank is fully functional; no dummy extensions welded to rear of tank Comes in a raw finish and accepts stock-style speedometer and dash 5.2-gallon...

Can be used to update the stock mounting hardware or for new constructions Kit Includes: One hose protector One spacer Two mount brackets Two rubb...

2" Stretch over stock length; capacity is approximately 4.2 gallons Comes complete with all necessary mounting hardware Gas tanks are fully functi...

Extended design of these tanks allows the lines of the tank to flow into the lines of the seat for a great custom look Tanks have cutout in rear f...

Extended design of these tanks allows the lines of the tank to flow into the lines of the seat for a great custom look Tanks have cutout in rear f...

Chrome-plated hardware replaces front OEM gas tank mounting bolts Includes four 5/16" -18 x 3/4" flathead Allen bolts with recessed washers Manuf...

Kit includes front and rear tank mounts, rubber grommets and hardware Manufacturer Part Number: 346103-PB-LB1

Glass filters feature chrome ends Manufacturer Part Number: 03-0050A-BC145

Chromed brackets permit seat to flip over gas tank for easy access to engine components Square style fits custom rigid and FXST/FLST frames Width ...

Allows installation of extra-wide tires Kit includes offset sprocket and machined spacer Manufacturer Part Number: 191368-BX-LB1

Allows installation of extra-wide tires Kit includes offset sprocket and machined spacer Manufacturer Part Number: 191371-BX-LB1

High-quality OEM-style replacement sprockets Heat-treated for added durability For use with 530 chain Manufacturer Part Number: 26-0037-22-SC2

Replacement nut attaches mainshaft sprocket or belt pulley to main drive gear Manufacturer Part Number: 33-0303-SC1

New-style throwout bearing kit Manufacturer Part Number: 37312-75-HC3

Undercut-tooth design and plate kit offers sure, positive engagement Manufacturer Part Number: 26-0267/8SC2

Replacement hardware for cam cover Made in the USA Manufacturer Part Number: MK373S

Replacement bolts for lifter base Made in the USA Manufacturer Part Number: MK378S

Replacement hardware Made in the USA Manufacturer Part Number: MK371S

Quality steel, stronger than the aluminum OEM follower Manufacturer Part Number: 75206

High-strength steel kickstand Replaces OEM kickstands perfectly Under stock length kickstands are for bikes with lowered suspention Big Twin, Soft...

Replacement component for chrome kickstands Manufacturer Part Number: 11-0122-BC101

Original-style replacement for Panhead models; includes everything needed Each motor requires four tube assemblies. Manufacturer Part Number: 72703

Replacement cable anchor pin and plastic bushings for early-style clutch and brake levers Manufacturer Part Number: 26-0616-12-HC3

Wide pedal features a brilliantly chromed swivel Manufacturer Part Number: 16-0027A SC3

Highly chromed custom footpegs have neoprene O-rings and are used for many applications Matching shift peg also available (sold separately) Sold i...

Kit contains chrome clevis pin, chrome washer and chrome cotter pin Replaces brake clevis pin and hardware Manufacturer Part Number: 110054-HC3

Flat reinforced pedal Includes swivel Manufacturer Part Number: 17-0951-BC251

Contact sets feature a metal spring designed to resist metal fatigue and a follower of space-age material to ensure longer life Condenser is seale...

Contact sets feature a metal spring designed to resist metal fatigue and a follower of space-age material to ensure longer life Condenser is seale...

Each pair is precision-machined and comes with a set of chrome-plated socket-head screws Made from cast aluminum, polished and chrome-plated Manu...

Zinc-plated steel spacer shims for rear sprocket or belt pulley Used often when installing a wider rear tire Longer bolts may be required when usi...

Features zinc-finished moisture-proof case, hardened steel plunger and long-life contact disc Manufacturer Part Number: MC-DRAG048

Replacement advance unit with bolt Manufacturer Part Number: 172018-BX30

Includes breaker plate assembly and the advance unit with bolt Manufacturer Part Number: 172044-BX30

Chromed 1/8" thick steel exhaust hangers Manufacturer Part Number: 14-6535-BC108

Chromed 1/8" thick steel exhaust hangers Manufacturer Part Number: 14-6536-BC205

Come with throttle sleeve installed for dual or single-cable applications Manufacturer Part Number: 170506STS-BC324

Feature a unique textured layer of thin black rubber over a foam sleeve Chrome end caps and throttle sleeve included Manufacturer Part Number: 17...

Glass filters feature chrome ends Manufacturer Part Number: 03-0051A-BC145

Custom Wide Glide-style front fender with chrome mounting bracket and raw finish Manufacturer Part Number: 090057-PB-LB2