New products

A chrome-plated replica of the spark plug holder found on early Panheads, updated to accept even late-model Shovelhead deep-reach plugs Metal hold...

Dampen unwanted fork oscillations (speed wobble) Seven-position hydraulic steering dampers Fully adjustable; allows full-fork movement from stop-t...

Dampen unwanted fork oscillations (speed wobble) Seven-position hydraulic steering dampers Fully adjustable; allows full-fork movement from stop-t...

Dampen unwanted fork oscillations (speed wobble) Seven-position hydraulic steering dampers Fully adjustable; allows full-fork movement from stop-t...

Replacement OE bushings Made in Japan Bushings and seals should be replaced whenever the front forks are disassembled. Manufacturer Part Number: ...

Replacement OE bushings Made in Japan Bushings and seals should be replaced whenever the front forks are disassembled. Manufacturer Part Number: ...

Replacement OE bushings Made in Japan Bushings and seals should be replaced whenever the front forks are disassembled. Manufacturer Part Number: ...

Damper tube assemblies meet or exceed OEM specifications Designed to fit many Showa front forks Sold each; two required to rebuild or assemble a f...

Meets or exceeds OEM specifications Two sets required to rebuild the front end Manufacturer Part Number: 242113-BX-LB2

Replacement damper kit includes one pair of dampers and four chrome cup washers Meets or exceeds OEM specifications Manufacturer Part Number: 358...

Faithful reproduction of the late-style handlebar damper kits Includes two studs, two rubber damper sets and four zinc-plated cup washers Manufac...

Adapts FLSTF front fender to any FLT or FLHT style fork using a stock wheel only Works with Drag Specialties Steel Front Fender - see Related Prod...

Adapts FLSTF front fender to any FLT or FLHT style fork using a stock wheel only Works with Drag Specialties Steel Front Fender - see Related Prod...

Die-cast Construction For mounting signals on front fork tubes Manufacturer Part Number: 12-6049-41BC114

Precision machined for an exact fit Manufacturer Part Number: 77-0003-HC1

Chrome fork tube plugs/caps Manufacturer Part Number: 23-0213-BC114

Steering stem bearing adjusting nut Manufacturer Part Number: 23-0326-BC102

Chrome fork tube plugs/caps Manufacturer Part Number: 301119-BC105

Chrome Timken-type bearing cups Manufacturer Part Number: 07-0002-BULK

Replacement lens for Bullet Marker Lights Manufacturer Part Number: 165075-HC3

Replacement lens for Bullet Marker Lights Manufacturer Part Number: 165074-HC3

Small, aerodynamically shaped 12 V marker lights Not DOT or ECE compliant. Manufacturer Part Number: 162052-BC207

Small, aerodynamically shaped 12 V marker lights Not DOT or ECE compliant. Manufacturer Part Number: 162051-BC207

Bottom-mount with a blue high beam indicator light Comes with a 12 V 55/60 W H4 halogen bulb and mounting block Manufacturer Part Number: 206002H...

Replacement bottom-mount headlight shell with trim ring Bulb not included Manufacturer Part Number: 20-6002S-BX-LB1

Headlight comes complete with 55/100 W quartz halogen bulb and mounting block with bolt For custom applications Manufacturer Part Number: 160314-...

"Revival" bracket mounts most 4-1/2" spotlights Manufacturer Part Number: 20-0309B-SC5

Replacement lens gasket Manufacturer Part Number: 027559-HC3

Each set includes caps for both the axle nut and axle head (where required), setscrews and hex key wrench Each cap has an internal hex to allow mo...

Each set includes caps for both the axle nut and axle head (where required), setscrews and hex key wrench Each cap has an internal hex to allow mo...

12 V headlight features an H4 55/60 W bulb Additional 5 W low-intensity running light is also mounted in the housing Manufacturer Part Number: 16...

For Drag Specialties handlebar end marker lights Clear, single filament, 12 V, 23 W Manufacturer Part Number: AD-0645-BX

Mounting brackets are 4-3/4" shorter than stock brackets Give the rear of the bike a sleeker look; uses stock mounting hardware Manufacturer Part...

Solid die-cast construction with a chrome finish Two-piece design moves the OEM signals in close for a cleaner look Mounting hardware included Ma...

Super-sturdy chrome bracket replaces damaged or broken rear turn signal bracket, 13" stock replacement length Manufacturer Part Number: 280254-SC5

OEM replacement turn signal mounting brackets All wires route easily through the bracket for a clean look when installed Universal-style clamp all...

Kit includes axle, spacers, nuts and washers Models with ABS require only one spacer within kit. Manufacturer Part Number: 16-0306BC520

If a windshield is used, longer bolts may be needed (not included in kit) Manufacturer Part Number: 20-0620-BX-LB2

Polished, then chrome plated Made from cold-rolled steel Manufacturer Part Number: 16-0312-HC3

Economical alternative to billet clamps Manufacturer Part Number: 11-0051-SC1

Economical alternative to billet clamps Manufacturer Part Number: 11-0053-SC1

Economical alternative to billet clamps Manufacturer Part Number: 11-0054-SC1

Kit includes axle, spacers, nuts and washers Rear axle length is measured from the inside of the bolt head to the end of the threads. Models with ...

Shines brighter than standard taillights but draws less current Dual-function design 1-5/16" stud centers Not DOT compliant Manufacturer Part Num...

Weld-in style bungs used for custom-mounting filler hole in fuel tanks Accepts '84-E'96 screw-in gas caps Manufacturer Part Number: 22-0042RL-HC4

Chrome extended ring gives a custom look to a stock 5-3/4" headlight Replaces the OEM trim ring Manufacturer Part Number: 160341-BXLB1

Chrome extended ring gives a custom look to a stock 5-3/4" headlight Replaces the OEM trim ring Manufacturer Part Number: 160342-BXLB1