New products

Chrome steel riser studs Manufacturer Part Number: 241520

Chrome finish Includes gasket Manufacturer Part Number: 28-0067A

Includes rubber cover gasket Manufacturer Part Number: H07-0665-C

Include lever and clamp half Compatible with DOT 4 or 5 brake fluid Master cylinders work with all 1" or 1-1/4" diameter handlebars Manufacturer ...

Sold as a kit of two risers, one-piece top clamp and all necessary hardware Tapped for 1/2"-13 bolts Made in the USA Manufacturer Part Number: 06...

Aluminum construction Uses OEM switches or equivalent (not included unless otherwise indicated) Replacement parts also available separately Manuf...

Billet aluminum construction Covers the entire clamping area of 1-1/4" handlebars that are sized down to 1"; can also be used on 1" handlebars For...

Billet aluminum construction Covers the entire clamping area of 1-1/4" handlebars that are sized down to 1"; can also be used on 1" handlebars For...

Risers are machined from billet aluminum Fit any handlebars that have a 1" diameter in the clamping area, and have 1-1/4" riser diameter to compli...

Risers are machined from billet aluminum Fit any handlebars that have a 1" diameter in the clamping area, and have 1-1/4" riser diameter to compli...

These risers are forged from 6061-T6 aluminum for superior strength Drilled and tapped for 1/2"-13 riser bolts (bolts sold separately) CNC-machine...

These risers are forged from 6061-T6 aluminum for superior strength Drilled and tapped for 1/2"-13 riser bolts (bolts sold separately) CNC-machine...

These risers are forged from 6061-T6 aluminum for superior strength Drilled and tapped for 1/2"-13 riser bolts (bolts sold separately) CNC-machine...

These risers are forged from 6061-T6 aluminum for superior strength Drilled and tapped for 1/2"-13 riser bolts (bolts sold separately) CNC-machine...

These risers are forged from 6061-T6 aluminum for superior strength Drilled and tapped for 1/2"-13 riser bolts (bolts sold separately) CNC-machine...

These risers are forged from 6061-T6 aluminum for superior strength Drilled and tapped for 1/2"-13 riser bolts (bolts sold separately) CNC-machine...

These risers are forged from 6061-T6 aluminum for superior strength Drilled and tapped for 1/2"-13 riser bolts (bolts sold separately) CNC-machine...

These risers are forged from 6061-T6 aluminum for superior strength Drilled and tapped for 1/2"-13 riser bolts (bolts sold separately) CNC-machine...

Soft, pliable rubber grips End caps and detail rings are chrome-plated billet aluminum Throttle sleeve installed Manufacturer Part Number: H17-0556T

Feature die-cast construction Custom rubber insets for all-day riding Left side grip features setscrew attachment Manufacturer Part Number: 0630-...

Feature a unique textured layer of thin black rubber over a foam sleeve Chrome end caps and throttle sleeve included Manufacturer Part Number: H1...

Complete dual-cable throttle assembly Includes matching left-hand grip Accepts thread-in cables Sold with matching left grip Manufacturer Part Nu...

Die-cast levers Wide blade fits hand perfectly Clean, custom styling Manufacturer Part Number: 053842

Chrome master cylinders with levers, clamp half and hardware Not for use with 1-1/4"/1-1/2" handlebars that are not clearanced for master cylinder...

Levers are compatible with OEM lever perches Constructed of lightweight aluminum Manufacturer Part Number: H07-0575-B

Made from 1.25" diameter steel tubing Made in the U.S.A. Not for use with saddlebag rails. Rear Saddlebag bars will fit '04-'13 FLTR/X models if u...

Made from 1.25" diameter steel tubing Made in the U.S.A. Not for use with saddlebag rails. Rear Saddlebag bars will fit '04-'13 FLTR/X models if u...

The ultimate 1-1/4" diameter handlebar, designed for maximum comfort Optional gauge mounts sold separately Made in the U.S.A. Not for use with sto...

The ultimate 1-1/4" diameter handlebar, designed for maximum comfort Optional gauge mounts sold separately Made in the U.S.A. Not for use with sto...

Optional one-piece top clamp is machined from billet aluminum Brilliant show-chrome finish For use with Drag Specialties 1-1/2" Big Buffalo bars S...

Die-cast clamp for most '74-'17 models with 3-1/2" on-center risers and offset mounting holes Fits 1" OD diameter bars Manufacturer Part Number: ...

Chrome switch housings available separately Master cylinders accept OEM-style rebuild kits and have clearance for all 1-1/4" handlebars Models wit...

Replacement mechanical clutch assembly for PART #s 0610-0241 & 0610-0532 Die-cast aluminum switch housings have radiused edges, OEM-style clam...

Wide blade levers sets are made with strong, high-quality aluminum with CNC-machined slots Includes anti-rattle clip and clutch lever pivot bushin...

Risers are machined from billet aluminum Fit any handlebars that have a 1" diameter in the clamping area, and have 1-1/4" riser diameter to compli...

Risers are machined from billet aluminum Fit any handlebars that have a 1" diameter in the clamping area, and have 1-1/4" riser diameter to compli...

Risers are machined from billet aluminum Fit any handlebars that have a 1" diameter in the clamping area, and have 1-1/4" riser diameter to compli...

Risers are machined from billet aluminum Fit any handlebars that have a 1" diameter in the clamping area, and have 1-1/4" riser diameter to compli...

Risers are machined from billet aluminum Fit any handlebars that have a 1" diameter in the clamping area, and have 1-1/4" riser diameter to compli...

Risers are machined from billet aluminum Fit any handlebars that have a 1" diameter in the clamping area, and have 1-1/4" riser diameter to compli...

Sold as a kit of two risers, one-piece top clamp and all necessary hardware Tapped for 1/2"-13 bolts Made in the USA Manufacturer Part Number: 06...

Sold as a kit of two risers, one-piece top clamp and all necessary hardware Tapped for 1/2"-13 bolts Made in the USA Manufacturer Part Number: 06...

Sold as a kit of two risers, one-piece top clamp and all necessary hardware Tapped for 1/2"-13 bolts Made in the USA Manufacturer Part Number: 06...

Sold as a kit of two risers, one-piece top clamp and all necessary hardware Tapped for 1/2"-13 bolts Made in the USA Manufacturer Part Number: 06...

Sold as a kit of two risers, one-piece top clamp and all necessary hardware Tapped for 1/2"-13 bolts Made in the USA Manufacturer Part Number: 06...

Sold as a kit of two risers, one-piece top clamp and all necessary hardware Tapped for 1/2"-13 bolts Made in the USA Manufacturer Part Number: 06...

Sold as a kit of two risers, one-piece top clamp and all necessary hardware Tapped for 1/2"-13 bolts Made in the USA Manufacturer Part Number: 06...

Sold as a kit of two risers, one-piece top clamp and all necessary hardware Tapped for 1/2"-13 bolts Made in the USA Manufacturer Part Number: 06...