NIGHT PROWLER LED INTEGRATED TAILLIGHT *NEW AND IMPROVED*

NEW AND IMPROVED DESIGN! *07/23*

• Even more LED's
• More filled and better shaped turn signal arrow
• Even brighter

LED TAILLIGHT WITH INTEGRATED TURN SIGNALS

• LIFETIME WARRANTY
• Built in signal lights flash amber when activated
• LOW PROFILE, custom made to our specifications
• License plate tag light window
• Available in SMOKED, RED OR CLEAR
• Load equalizers are NOT required for can bus bikes (11' LATER SOFTAILS / 12' LATER DYNAS / 14' LATER TOURING & SPORTSTERS)

Fitment : 

• 99' & later models with center tail light fender (Square back baseplate)
• Can also fit 98' & earlier models when used with our base plate adaptor or using an adapter base plate!

Note : 

 11' Later Softail, 12' Later Dyna, 14' Later Touring & Sportster may need to perform a BCM sync. Can be done by installer with no tools necessary! After installing LED turn signals you will find BCM codes b2151. b2156 for the rear and b2141, b2146 for the front. These codes accompanied with a rapid indicator flash on the dash and a red security light. Performing a BCM turn signal sync will resolve this symptom.

BCM sync instructions :

1. - Turn the ignition switch to the ON position, do not start the bike.
2. - Turn the Hazard Lights (4-Way Flashers) ON.
3. - Turn the ignition to the OFF position leaving the Hazard Lights flashing.
4. - Let the hazard Lights flash for 2 minutes.
5. - Turn the ignition switch to the ON position, do not start the bike.
6. - Turn the Hazard Lights (4-Way Flashers) OFF.
7. - Turn the ignition switch to the OFF position.