BAGGER

The original Muller Power Clutch. This is an easy to install replacement for your stock ball and ramp assembly that your clutch cable connects to...

Allows for optimum rebound and compression performance for any given rider weight, personal ride quality preference, and personal riding style. RE...

Allows for optimum rebound and compression performance for any given rider weight, personal ride quality preference, and personal riding style. REV...

Allows for optimum rebound and compression performance for any given rider weight, personal ride quality preference, and personal riding style. RE...

The V-Line chin spoiler will complete the look of any Big-Twin bagger that is needing something aggressive, yet subtle.   Hand-laid fiberglass c...

Eliminates the need for the ungainly factory engine guard, giving your bike a clean look. Mild steel with a gloss black powder-coated finish. M...

Introducing the Trask Billet Tail Section: a vital upgrade for your performance bagger. Lightweight and extremely stiff, this tail section is essen...

The Trask chin spoiler has been a staple on Trask's custom builds for years. This chin spoiler is designed to help fill the gap between the wheel ...

A must-have companion for your 09’-24’ Trask Billet Swing Arm if planning to install radial brake calipers. This bracket allows you to install a ra...

Available in: 51 Tooth 52 Tooth 54 Tooth NOTE: THIS KIT IS ONLY COMPATIBLE WITH THE TRASK CUSH DRIVE CHAIN CONVERSION CARRIER

Add a custom look to your primary and show off all your go-fast internals with the clear Trask Assault Derby Cover! Fits most 99’ and newer big-t...

If you are looking to convert your cable-actuated clutch to a smooth and heavy-duty hydraulic setup, Trask has you covered! Made from machined 606...

Add a piece of eye candy to your Harley Big-Twin with the Trask Performance Assault Cam Cover. Show off the inner workings of your engine with our...

Add a piece of eye candy to your Harley M8 with the Trask Performance Assault Cam Cover. Show off the inner workings of your engine with our specia...

A time-proven system, the Trask Mystfree Breather Kit is a Twin-Cam necessity designed to drain oil more efficiently into the rocker, resulting in...

Meticulously hand-built, our Assault Exhausts are TIG welded, then mandrel bent, making each one an excellent piece of craftsmanship. Our Flagship...

For the better portion of the last couple of years, FXR DIVISION has been working on designing & building our latest contribution to the Perfor...

8” wide front LS-2 fender fits 18” tire. One piece stamped construction 14 gauge steel fender. Laser trimmed for accuracy. 8” for your fat tire bag...

Heavy 14 gauge steel construction.  Most front fenders are available in three different widths (measured inside fender).  Fenders are inspected per...

Heavy 14 gauge steel construction.  Most front fenders are available in three different widths (measured inside fender).  Fenders are inspected per...

KLOCKWERKS 8" ICE KOLOR FLARE FOR H-D 1998-2013 ROAD GLIDE Upgrade your stock windshield to the ultimate performance-tested windshield! Patented de...

KLOCKWERKS ICE KOLOR FLARE FOR H-D 2014-2022 STREET GLIDE Upgrade your stock windshield to the ultimate performance-tested windshield! Patented des...

INTELLITRONIX FUEL GAUGES Now you can really watch your fuel level with the Intellitronix super bright LED digital fuel gauge!  It is microprocesso...

GOODEN-TITE SWINGARM ISOLATORS BY ALLOY ART Fits 80' - 08' Touring Models & All FXR Models, 09' - 10' Touring, 11' Current Touring Fills Void ...

Show off those reservoirs with these Legends mounts! Optional remote reservoir mounting kit allows for easy access to compression adjusters Com...

4” ROLLED CONE MUFFLER WITH A 2 ¼ COILED PERFORATED BAFFLE FOR INCREASED TORQUE AND A DEEP TONE 065 STAINLESS STEEL HEADERS STEPPED FROM 1 ¾” T...

  4” ROLLED CONE MUFFLER WITH A 2 ¼ COILED PERFORATED BAFFLE FOR INCREASED TORQUE AND A DEEP TONE 065 STAINLESS STEEL HEADERS STEPPED FROM 1 ¾” ...

4.5” HIGH FLOW PERFORMANCE ROLLED CONE MUFFLER WITH STEPPED BAFFLE FROM 2 ¼ TO 2 ½ INCHES. INCREASES BOTTOM TO MID-RANGE TORQUE AND HORSEPOWER ON...

4” ROLLED CONE MUFFLER WITH A 2 ¼ COILED PERFORATED BAFFLE FOR INCREASED TORQUE AND A DEEP TONE 065 STAINLESS STEEL HEADERS STEPPED FROM 1 ¾” T...

4” ROLLED CONE MUFFLER WITH A 2 ¼ COILED PERFORATED BAFFLE FOR INCREASED TORQUE AND A DEEP TONE 065 STAINLESS STEEL HEADERS STEPPED FROM 1 ¾” T...

4.5” HIGH FLOW PERFORMANCE ROLLED CONE MUFFLER WITH STEPPED BAFFLE FROM 2 ¼ TO 2 ½ INCHES. INCREASES BOTTOM TO MID-RANGE TORQUE AND HORSEPOWER O...

ARLEN NESS DIAMOND GRIPS Diamond design rubber grips with integrated knurling inside each diamond shaped pocket for a vintage look with excellent ...

NAMZ “Plug-n-Play” Rear Fender Harness, fits: (Road King, Road Glide, Street Glide & Electra Glide 2014 to Current) 6-Position Molex with 12-po...

NAMZ “Plug-n-Play” Rear Fender Harness, fits: (Road Glide, Street Glide 2010-2013) 6-Position Molex with 12-position fender fascia connector includ...

NAMZ “Plug-n-Play” Rear Fender Harness, 8-Position Multilock to 6-position Multilock, 100% plug-n-play. Simple to install, 100% plug and play! Can...

Features: Full range of quick adjustability smooth 2 finger lever design for improved comfort Easier pullover OEM by (30%) average Built-in mirror...

Clean up your bike’s front end and add extra braking power at the same time. Extremely strong wheels made in our custom drop forge mold and CNC ma...

Geezer Engineering Fork-Sliders are designed & assembled in the USA. They powder coat Fork-Sliders domestically to ensure the highest possible...

Geezer Engineering Fork-Sliders are designed & assembled in the USA. They powder coat Fork-Sliders domestically to ensure the highest possible...

This kit contains a set of 49 mm Fork-Tubes for 2014 & later Touring Models (either stock length or 2"+) and a complete Fork-Rebuild Kit. Featu...

Features: Superior quality, complete, and compatible with your touring Harley! Our kit allows you to upgrade Harley-Davidson touring models (2013...

Close those gaps with Geezer Engineering's carbon fiber side filler panels to your rear fender! Designed to work with Geezer Engineering's 2008 and...

Billet 6061 Aluminum  Hard black anodize Risers are drilled with 1/2 hole for internal wiring Works with standard 1" handlebar Sold in pairs wi...

  Be proud of what you put on your bike. At Thrashin Supply Co. they've striven to build the best parts, without cutting corners, right here...

  Be proud of what you put on your bike. At Thrashin Supply Co. they've striven to build the best parts, without cutting corners, right here...

Made specifically to fit Thrashin Supply OG Risers.  Increase your Thrashin Riser Length by 1/2" or 1" with these spacers. 6061 Aluminum Made i...

This piece is ONLY required if you would like to run your Gauge Relocation on the front of your OG Risers. It is an extension that you add to the m...

  Big Bore Kit: 107" to 124" Big Bore Kit Winkle Black Finish with Fin Highlighting Bolt-on kit. No case machining required 4.250" bore Forged Pis...