FRAME & CHASSIS

A Sputhe Engineering Chassis Stabilizer (Posi-Trac) System is undoubtedly one of the BEST investments your can make for your Dyna Dynas are notorio...

Dyna Front & Rear Engine Mounts Much Stronger Than Stock Longer Life Expectancy  Added Support Front & Rear Available FRONT MOUNT Fits 91...

Trash those stock ugly zinc plated studs and acorn nuts. If you’re running a pair of nice aftermarket shocks this kit is a MUST. Easy to install, a...

ARP SEAT BOLT KIT Add a finishing touch to the nice new seat with some color-matched accents for your ride. These billet aluminum CNC washers are ...

FXR BATTERY HOLD DOWN Replaces OEM #66183-82 Complete with hardware Eliminate battery movement causing terminal arching against seat pan or other ...

Invisi-VIN covers and protects that uglu vin/emission sticker on the down tube of the frame. Black Powder Coated Finish Fast/ Easy Install (no too...

FRONT MOTOR MOUNT BY KINETIC STRUCTURES - FXR / FL Replace the old worn out rubber mount that always fails, rips and vibrates like hell! This has ...

TWIN CAM FXR CONVERSION KIT    This kit will include an array of brackets, tabs, panels, and mounts allowing you to install an early or late mod...

Stock axle adjuster plates are stamped out of a soft, weak cast material. They are prone to crack or mushroom in under even minor torque. Bung King...

FXR / FLT SWING ARM RUBBER MOUNT If you doing servicing the swingarm for a bearing upgrade, or just doing some maintenance, have peace of mind by r...

If you are running extra tall shocks or front forks, your bike may experience an excessive angle when leaned over on the kickstand. Our kickstand l...

Our friend Paul over at Bare Knuckle Chopper Parts makes another GREAT solution to the terrible stock axle adjusters. First, they use their tried a...

Trash those stock ugly zinc plated studs and acorn nuts. If you’re running a pair of nice aftermarket shocks this kit is a MUST. Easy to install, a...

Bare Knuckle Choppers 3.0 FXR/FLT Swingarm Bearing Conversion Kit is the BEST solution for rear-end stability on your 1980 - 2001 FXR and FLT tour...

Chrome Engine Mount Stabilizer Link  Chrome Finish Two Required For FLT/FLHT/FXR Applications Includes Chrome Mounting Hardware Sold each Replaces...

Complete Hardware Kit for DYNA Kickstand Assemblies. Kickstand pivot spring kit includes a kickstand bumper stop, chrome jiffy kickstand spring, an...

CHROME FORK BRACES 4 Piece Design For Easy Installation Prevents Fork Flex For Better Handling Characteristics Clean and simple chrome look Fits a...

FXR Kickstand Springs Nobody likes a floppy kickstand!  '91+ Models Direct OEM Replacement For #50005-85 /85a ('91+ models)  3.7" (hook to hook) S...

FXR / FLT SWING ARM REBUILD KIT WITH SPHERICAL BEARINGS FXR/FL models are notorious for the stock weak bushing assemblies causing excessive movemen...

RAMJET Rear Brembo Caliper Bracket for FXR Models With the success of our front caliper adapter brackets, a few years ago we decided to start worki...

FXR SIDE PANELS BY ARLEN NESS Available in Smooth or Louvered Quality ABS Plastic Smooth Finish Ready To Paint Completely Cover The Triangle Porti...

Rear brake line kit for your FXR! If you're upgrading your brakes to a late-model touring Brembo using our bracket kit, you'll also need this brake...

FXR SWINGARM PIVOT SHAFT If you servicing your FXR or FLT swing arm, or just doing some maintenance, have peace of mind by replacing your OEM pivo...

BACK IN STOCK and Produced right here in the USA by our friends over at FXR Division Add Style and Performance to your FXR with a set of FXR Divis...

This small part can save you a big headache down the road! Prevents swingarm damage caused by the small outside diameter factory spacer. Direct rep...

Front Engine Isolator for FXR & FL  Fits 80' - 08' FL Models & All FXR Models Cost Effective Upgrade or Replacement Over Stock Replaces OE...

FORM & FUNCTION FROM OUR FRIENDS OVER AT FXR DIVISION FXR Division took 1.250 x .125 steel tube, added clean and sleek factory style bends and ...

FXR Kickstand Pins '91 & up pin replaces OEM #50009-91 '82-'90 pin replaces OEM #50009-82 Strong steel constructions Chrome finish

INDUSTRY CUSTOMS REAR BRAKE TAB FOR FXR SWINGARM TO 00-LATER TOURING BRAKE CALIPER Industry Customs Rear Brake Tab for FXR Swingarm to 2000/later...

Strong, cost-effective replacement for the OEM kickstand. Direct OEM Replacement For #47904-90 A/B/C/D/E/F Available in Gloss Black Powdercoat Or ...

Alloy Art's Front Engine Mount Plate For FXR & FL  Lighter & Stronger Than Stock CNC-Machined Aluminum Construction Available In Machined ...

FXR KICKSTANDS Direct Replacement for OEM No: 50031-91 for FXR Models 1991 & Up.  Direct Replacement for OEM For #50069-82 for FXR Models '82-...

GOODEN-TITE SWINGARM ISOLATORS BY ALLOY ART Fits 80' - 08' Touring Models & All FXR Models, 09' - 10' Touring, 11' Current Touring Fills Void ...

Made of heavy-duty chromed steel to OEM specifications Replaces OEM #47159-79 Fitment : 82' & later FXR models 80'-06' Touring models

FXR BATTERY HOLD DOWN WITH TERRY COMPONENTS CABLES When putting a NOCO NLP20 lithium battery or a 20L battery (OEM #65989-97, factory in 97'-pres...

Harley Davidson Bagger 1" Rear Shock Lift Blocks by Hofmann Designs 2017 & later motorcycle with stock swingarm (not designed for aftermarket s...

NEW FXR BILLET DASH INSERTS! LIMITED RUN! Fits all FXR's with center fill dashes (Part number 61411-82) Includes laser cut 3M adhesive inserts for...

SMALL RADIUS LICENSE PLATE MOUNT Radius license plate mounts offer a super flush look Available for fenders up to 8" wide (FXR, Early Dyna, Sports...

STEERING BEARING KIT Restore the original smooth steering response Includes bearings, races, dust seals and grease! no more notchy feeling Exact O...

The days of the hard FXR Gangster Lean are done… Time to get rid of that shitty OEM Kick Stand and KISS Boot Combo and get your FXR sitting pretty ...

PRO 1 PERFORMANCE TRIPLE TREES (39MM) CNC Machined out of solid 6061 T-6 Billet Aluminum. Available in Black Anodize, and Raw aluminum finishes. I...

Made of rubber to protect your kickstand and prevent rattling Direct replacement for the factory one Sold each

39MM SPEED TREES :  CNC machined from 6061 aluminum. Available in Black anodized finish. These trees are designed for better stability. With a mod...

PRE-'18 SOFTAIL KICKSTANDS Direct replacement for OEM kickstand Made of steel Chrome finish